ESP  

 

 
  Wheelchair Tie Downs
  Occupant Restraints
  Tie Down Floor Track
  Accessories
  Wheelchair Lifts
  Lift Bus Options
  ADA Web Site

 
 
QRT Q-8100-A1 Deluxe Fully Automatic System
  8 Heavy duty automatic retractors (4)
  8 Dual tensioning knobs
  8 Hard cover case to protect belts
  8 Quick and easy style speed hooks
  8 Easy to use red release levers
 
QRT Q-8200-A1 Econo System
  8 Single tensioning knob
  8 Interchangeable belts
  8 Speed hooks
  8 Red release lever
  8 Meets SAE and ADA requirements
 
Sure-Lok RETRAKTOR System
  8 Retractable securements are easier and faster for drivers and/or occupants to use.
  8 Retraktor™ systems minimize floor clutter and required storage space when not in use.
  8 Flexible design allows for convenient mounting to the floor, sidewall or seat structures.
  8 Front tensioning retractors with right and left handles ensure optimum convenience and accessibility.
  8 Occupant restraint system, with our patented Height Adjuster, can accommodate virtually any size passenger.
 
FE500 and FE800 Systems
  8 These systems are priced affordably, yet provide proven securement performance.
  8 Each securement strap assembly has a minimum breaking strength of 2,500 pounds and meets all the requirements of the Americans with Disabilities Act (ADA) and FMVSS 222.
  8 These systems have been used by transportation providers for over 25 years.
  8 The wide variety of system floor tracks and plates allow you to choose the particular configuration that best serves the needs of your passengers and provides the most efficient installation into your specific vehicle.
  8 The 1" wide strap assemblies can be easily attached to virtually any wheelchair aid. The webbing simply conforms to the structural frame of the wheelchair aid and prevents it from being scratched or dented.
 
 
 
Top
Besi Adjustable Retraining Harness
  8 Available in 3 color coded sizes
  8 Each size comes with 3 zipper inserts
  8 Small: 22" - 24" - 26" - 28"
  8 Med: 30" - 32" - 34" - 36"
  8 Large: 38" - 40" - 42" - 44"
 
Q-Vest
  8 Meets FMVSS 209/302
  8 Crash tested at 30 mph at 20g's on a school bus seat
  8 Two available sizes
     
     
 
Lap Belts
FE200600 Premium 108" for L track.
FE200612 Premium 108" for A track.
FE200594 Standard 98" for L track.
FE200601 Standard 98" for A track.
FE200595 Integrated 80"
FE200842 Integrated 96"
FE200637 12" extension
FE200637-20 20" extension
 
Shoulder Belts
FE200727 Integrated Lap and shoulder
FE200727HA Integrated combo with height adjuster
FE200599 52" non-retractable for L track
FE200613 52" non-retractable for A track
FE200732 82" non-retractable for L track
FE200716 82" non-retractable for A track
FE200599HA Non retractable with height adjuster
FE200710 Non-retractable 52" fixed point
FE200710L Non-retractable 82" fixed point
FE200710HA Non-retractable w\ height adjuster
FE200604 112" retractable
FE200604HA 136" retractable w\ height adjuster
FE200604L 136" retractable
FE200865 Non-retractable with quick disconnect

 
 
 
 
Top
Heavy Duty A Vertical Track
  8 High strength 11 gauge steel
  8 50,000 psi maximum yield
  8 Gun metal grey
  8 Rust-inhibiting powder coat
2025 10 foot section
2025-0600 5 foot section
 
Heavy Duty A Horizotal Track
  8 High strength 11 gauge steel
  8 50,000 psi maximum yield
  8 Gun metal grey
  8 Rust-inhibiting powder coat
FE702-01 10 foot section
FE702-01-060 5 foot section
 
Heavy Duty L Track
8 7075-T6 Aluminum
8 Natural finish standard
8 Available in black finish
FE744-01 100 inch section
FE200716 8 inch section with 4 countersunk holes(.26)
FE200762 9 inch section with 2 holes(.42)
FE750-01 Medium duty, 100 inch section
 
Heavy Duty L Track with Flanges
8 7075-T6 Aluminum
8 Natural finish standard
8 Available in black finish
FE748-01-PD4 100 inch section
FE751-01 Medium duty, 100 inch section
FE751-01-PD4 Medium duty, 100 inch section with mounting holes
 
FE200740 Floor Plate
 
Heavy-Duty series A
FE200742 Floor Plate Kit
Heavy-Duty series A
FE200784 Floor Plate Kit
Series L Single Bolt Surface Mount Floor Plate with Collar and Mounting Hardware
FE200844 Floor Plate Kit
Series L Single Bolt Flush Mount Floor Plate with Collar and Mounting Hardware
 
Top
8705 Premium Web Cutter
For use in emergency evacuations. Meets the requirements of the National Standards for School Buses.
8663 End Cap
For use with Series L Aluminum Flanged Track, FE748 or FE751.
FE200751 Plastic Filler Strip
For use with Series L Aluminum Track. Available in 25 ft rolls.
FE200745 Sidewall Mounting Kit
For installing the web guide of the FE200604 Retractable Shoulder Belt, FE200727 Integrated Combination Belt, and the FE200710 Fixed-Point Shoulder Belt.
FE200746 Vinyl Storage Container
Made of durable, flame resistant vinyl, this container provides practical and economical storage of the total system when not in use. Will store all of our systems, including the new RetraktorTM Systems. An interior pocket can store operation instructions and a web cutter. Outer edge stiffeners allow for mounting to the vehicle sidewall or underneath an adjoining seat.
Q5-6409 Neck Protector
A soft cushion providing comfort for passengers where shoulder shoulder belt is constantly against the neck area.
Q5-6327 Webbing Loop
Provides an easier installation to the tie-down systems for difficult chairs
Q5-7 Training Program
Take a minute for safety! Q'Straint's professional training program contains all resources necessary for hands on training.